Contour Computer Backpack, 15-3/4"Wx9"Dx19-1/2"H, Black

Industrial chair offers contoured seats and backs with lumbar support, 2-1/2" seat cushion depth, an overall height range of 19" to 27" and a reinforced nylon five-prong base with a 20" diameter footring. Independent paddle levers control 22 degree back angle and 10 degree seat tilt adjustment. Back adjusts 5" up and down. Seat measures 18-1/2" wide x 17" deep. Back measures 15-3/4" wide x 12" high.

End tab wallets allow top-tab file folders to fit neatly inside without bulging the side gussets. The protective flap and elastic closure ensures that the contents will not fall out when transported. Can be incorporated into existing shelf filing systems. RedRope wallets include 3/4" wide straight-cut tabs, 9-1/2" high fully lined Tyvek gussets. Contain 30 percent post-consumer material.

Mobile pedestal with woodgrain laminate finish provides the solution for storing and organizing CDs with a pencil and media drawer. Offers pencil drawer plus locking media and file drawers to store supplies, CDs and files. Media drawer organizer holds CDs (flat), CD jewel cases in the "label up" position, VHS tapes and 3-1/2"/Zip disks. File drawer stores letter-size and legal-size files. Hangrails are provided in all file drawers for side-to-side letter and legal filing; and front-to-back for letter filing. Box drawers operate on ball-bearing suspension with 3/4 extension. File drawers operate on ball-bearing suspension with full extension. Adjustable hex leveling glides allow floor-standing furniture to be easily leveled without lifting the unit. Glides have 3/4" adjustable range. Use pedestal freestanding or under 29-1/2" high workstations. Meets or exceeds ANSI/BIFMA and ISTA performance standards.

Mobile pedestal with woodgrain laminate finish provides the solution for storing and organizing CDs with a pencil and media drawer. Offers pencil drawer plus locking media and file drawers to store supplies, CDs and files. Media drawer organizer holds CDs (flat), CD jewel cases in the "label up" position, VHS tapes and 3-1/2"/Zip disks. File drawer stores letter-size and legal-size files. Hangrails are provided in all file drawers for side-to-side letter and legal filing; and front-to-back for letter filing. Box drawers operate on ball-bearing suspension with 3/4 extension. File drawers operate on ball-bearing suspension with full extension. Adjustable hex leveling glides allow floor-standing furniture to be easily leveled without lifting the unit. Glides have 3/4" adjustable range. Use pedestal freestanding or under 29-1/2" high workstations. Meets or exceeds ANSI/BIFMA and ISTA performance standards.

"Components of the Park Avenue Collection's U workstation feature tops with 1-1/8"" thick three-ply balanced panel and solid core construction. Resists warping. Adjustable hex leveling glides allow floor-standing furniture to be leveled without lifting the unit; glides have 3/4"" adjustable range. Two cord management grommets, for routing and hiding wires and cables, are located in the end panels of all desks. Component tops and backs/modesty panels are sized in 15-3/4"" wide increments to correspond with modular pedestals. Component tops and backs/modesty panels must be used in conjunction with modular pedestals, measure 1-1/8"" thick and provide finished back for modular pedestals or an enclosed kneewell. End panels support the end of a component top if no modular pedestal. Depth of end panels are 3/4"" less than the depth of the component tops to accommodate the modesty panel. Cannot be used as return or desk shells. Meets or exceeds ANSI/BIFMA and ISTA performance standards. This is a special order item, please allow 4-8 weeks for delivery."

"Components of the Park Avenue Collection's U workstation feature tops with 1-1/8"" thick three-ply balanced panel and solid core construction. Resists warping. Adjustable hex leveling glides allow floor-standing furniture to be leveled without lifting the unit; glides have 3/4"" adjustable range. Two cord management grommets, for routing and hiding wires and cables, are located in the end panels of all desks. Component tops and backs/modesty panels are sized in 15-3/4"" wide increments to correspond with modular pedestals. Component tops and backs/modesty panels must be used in conjunction with modular pedestals, measure 1-1/8"" thick and provide finished back for modular pedestals or an enclosed kneewell. End panels support the end of a component top if no modular pedestal. Depth of end panels are 3/4"" less than the depth of the component tops to accommodate the modesty panel. Cannot be used as return or desk shells. Meets or exceeds ANSI/BIFMA and ISTA performance standards. This is a special order item, please allow 4-8 weeks for delivery."

Title stamper is specially designed system that evenly disperses instant-drying ink. Protective end piece ensures clean impressions. Stamps "PAST DUE." Impression size is 1-3/4" x 5/8".

Title stamper is specially designed system that evenly disperses instant-drying ink. Protective end piece ensures clean impressions. Stamps "RUSH." Impression size is 1-3/4" x 5/8".

Title stamper is specially designed system that evenly disperses instant-drying ink. Protective end piece ensures clean impressions. Stamps "RECEIVED." Impression size is 1-3/4" x 5/8".

Title stamper is specially designed system that evenly disperses instant-drying ink. Protective end piece ensures clean impressions. Stamps "FAXED." Impression size is 1-3/4" x 5/8".

Title stamper is specially designed system that evenly disperses instant-drying ink. Protective end piece ensures clean impressions. Stamps "POSTED." Impression size is 1-3/4" x 5/8".